Original Author: Unknown
Last Update: 2000-02-24, Daniel Morissette, danmo@videotron.ca
This is an updated version of the (world famous) "ANALYSIS OF ARC EXPORT FILE FORMAT FOR ARC/INFO (REV 6.1.1)" that has been around for quite a while. It was impossible to find the author of the original document.
Note: ESRI considers the export/import file format to be proprietary. As a consequence, the identified format can only constitute a "best guess" and must always be considered as tentative and subject to revision, as more is learned.
It appears that all ARC/INFO files except user-created lookup tables are exported, including .ACODE and .PCODE.
The export file begins with a line with three fields.
The export file ends with a line beginning 'EOS'.
The ARC files are included first, in the following order (note that all these sections are not always present):
The beginning of each ARC file is indicated by the file name (a three-character
identifier) followed by ' 2' for single- precision or ' 3' for double-precision.
Floating point values carry 8 digits (ex: -1.0000000E+02) in single-precision coverages,
and 15 digits (ex: -1.19299887000023E+02) in double-precision coverages.
However,
there has to be an exception(!): double-precision floating point values inside INFO
tables carry 18 digits (ex: -5.70000000000000000E+01).
Each ARC file ends with a line of seven numbers beginning with a -1 and followed by six zeros, except the SIN, LOG, and PRJ files which end in 'EOX', 'EOL', and 'EOP', respectively. The LAB file uses a slight variation of this -1 ending line (see below). The format for each ARC file is specific to that type of file. These formats are covered below.
TX6, TX7, RXP and RPL sections start with the usual "TX6 2", etc. line, and end with "JABBERWOCKY". These sections are divided in sub-sections (called "subclasses" in Arc/Info), each sub-section starts with a line with the name of the subclass, and end with the same "-1 0 0 0 0 0 0" line as the other ARC files (except for RXP sub-sections, which end with "-1 0" only).
The beginning of the INFO file section is indicated by 'IFO 2', and its end is indicated by 'EOI'. The INFO files each begin with the file name. For example, the polygon attribute table would be 'STDFIG24C.PAT' on a line by itself. The format is the same for every INFO file. This format is given below.
Formats will be given for the most common ARC files:
The ARC (arc coordinates and topology) file consists of repeating sets of arc information. The first line of each set has seven numbers:
The subsequent lines of a set are the coordinates with two x-y pairs per line, if the coverage is single-precision. If there are an odd number of coordinates, the last line will have only one x-y pair. Double-precision puts one coordinate pair on each line.
An example of an actual ARC section follows:
ARC 2
1 2 2 1 1 2 2
3.4029994E+05 4.1001998E+06 3.4009988E+05 4.1002000E+06
2 3 3 2 3 2 2
3.4050000E+05 4.1001998E+06 3.4029994E+05 4.1001998E+06
3 1 1 4 1 2 4
3.4009988E+05 4.1002000E+06 3.4040006E+05 4.1003995E+06
3.4090012E+05 4.1002000E+06 3.4070003E+05 4.1001995E+06
4 4 4 3 4 2 2
3.4070003E+05 4.1001995E+06 3.4050000E+05 4.1001998E+06
5 6 3 4 4 3 3
3.4050000E+05 4.1001998E+06 3.4059997E+05 4.1001002E+06
3.4070003E+05 4.1001995E+06
6 7 4 5 1 3 3
3.4070003E+05 4.1001995E+06 3.4079997E+05 4.1000002E+06
3.4019978E+05 4.1000000E+06
7 5 5 2 1 3 2
3.4019978E+05 4.1000000E+06 3.4029994E+05 4.1001998E+06
-1 0 0 0 0 0 0
An example of a double-precision ARC section follows:
ARC 3
1 0 0 0 0 0 7
3.40200000000000E+05 4.10000000000000E+06
3.40300000000000E+05 4.10020000000000E+06
3.40500000000000E+05 4.10020000000000E+06
3.40600000000000E+05 4.10010000000000E+06
3.40700000000000E+05 4.10020000000000E+06
3.40800000000000E+05 4.10000000000000E+06
3.40200000000000E+05 4.10000000000000E+06
2 0 0 0 0 0 4
3.40100000000000E+05 4.10020000000000E+06
3.40400000000000E+05 4.10040000000000E+06
3.40900000000000E+05 4.10020000000000E+06
3.40100000000000E+05 4.10020000000000E+06
-1 0 0 0 0 0 0
The CNT (Polygon Centroid Coordinates) file contains the centroid of each polygon in the coverage. It has sets of centroid information with an initial coordinate line and, if there are labels, the label ids will follow, with up to 8 label ids per line.
The coordinate line has three fields:
An example of an actual CNT section follows:
CNT 2
0 3.4048516E+05 4.1001702E+06
1 3.4046691E+05 4.1002662E+06
1
1 3.4048875E+05 4.1000852E+06
2
0 3.4060000E+05 4.1001665E+06
-1 0 0 0 0 0 0
The following example shows centroids with more than one label attached to them:
CNT 2
0-1.1930000E+02 4.9150002E+01
1-1.1934029E+02 4.9169064E+01
1
13-1.1927331E+02 4.9168560E+01
2 3 4 5 6 7 8 9
10 11 12 13 14
1-1.1921005E+02 4.9199642E+01
15
-1 0 0 0 0 0 0
The LAB (Label Points) section consists of repeating sets of label point information. The first line of each set has four numbers:
The second and final line of the set gives the label box window. This information is marked as marked as obsolete in the SDL documentation. It currently contains repetitions of the x and y coordinates.
Note that the LAB section ends with a different '-1' line than the other files.
An example of an actual LAB section follows:
LAB 2
1 2 3.4046650E+05 4.1002668E+06
3.4046650E+05 4.1002668E+06 3.4046650E+05 4.1002668E+06
2 3 3.4048869E+05 4.1000852E+06
3.4048869E+05 4.1000852E+06 3.4048869E+05 4.1000852E+06
-1 0 0.0000000E+00 0.0000000E+00
An example of a double-precision LAB section follows:
LAB 3
1 2 3.40500000000000E+05 4.10006225000000E+06
3.40500000000000E+05 4.10006225000000E+06
3.40500000000000E+05 4.10006225000000E+06
2 3 3.40468812500000E+05 4.10026225000000E+06
3.40468812500000E+05 4.10026225000000E+06
3.40468812500000E+05 4.10026225000000E+06
-1 0 0.00000000000000E+00 0.00000000000000E+00
Labels are usually linked to the .PAT (Point or Polygon Attribute Table) file and the way LAB entries relate to .PAT records depends on the type of coverage.
In a POINT COVERAGE, the polygon ID in each label entry will always be 0 and in this case there would be a 1 to 1 relationship between the LAB entries and the .PAT records. I.E. Label#1 would correspond to .PAT record#1, etc...
In a POLYGON COVERAGE, labels are attached to polygons (PAL section) and their centroids, (CNT section), which are all linked to the .PAT table. In this case, the second value in a LAB entry is the associated polygon ID and can also be used as the 1-based record index in the .PAT table.
Also note that in a polygon coverage, there can be 0, 1 or more labels attached to each polygon. So we cannot assume that there is always a 1 to 1 relationship between labels and polygons.
Here is a portion of a E00 LAB section and the associated .PAT file:
LAB 2
3027 2-1.5342091E+02 5.7450005E+01
-1.5342091E+02 5.7450005E+01-1.5342091E+02 5.7450005E+01
3063 3 1.0056972E+01 5.7236324E+01
1.0056972E+01 5.7236324E+01 1.0056972E+01 5.7236324E+01
12092 4-1.6142227E+02 5.5626617E+01
-1.6142227E+02 5.5626617E+01-1.6142227E+02 5.5626617E+01
12091 5-1.6280910E+02 5.5155094E+01
-1.6280910E+02 5.5155094E+01-1.6280910E+02 5.5155094E+01
12090 6-1.6383534E+02 5.4822258E+01
-1.6383534E+02 5.4822258E+01-1.6383534E+02 5.4822258E+01
3680 7-1.3228665E+02 5.3464508E+01
-1.3228665E+02 5.3464508E+01-1.3228665E+02 5.3464508E+01
...
...
COUNTRY.PAT XX 4 4 16 270
AREA 4-1 14-1 12 3 60-1 -1 -1-1 1-
PERIMETER 4-1 54-1 12 3 60-1 -1 -1-1 2-
COUNTRY# 4-1 94-1 5-1 50-1 -1 -1-1 3-
COUNTRY-ID 4-1 134-1 5-1 50-1 -1 -1-1 4-
-2.1156395E+04 5.6565942E+03 1 0
9.2814314E-01 5.3587232E+00 2 3027
8.4326690E-01 5.9903331E+00 3 3063
6.9115734E-01 4.9834957E+00 4 12092
1.0414843E-01 1.2769473E+00 5 12091
5.7765609E-01 4.0451255E+00 6 12090
...
...
The LOG (Coverage History) file contains a free form set of lines of indeterminate number which are separated by lines which begins with a tilde, "~".
ARC records many commands and their resource impacts in this file. The standard ARC format for writing in the LOG has nine fields:
However, any information can be added to the LOG file in free- form format.
An example of an actual LOG section follows:
LOG 2 19940118 849 0 3 35export cover landli stdfigc none ~ 19940118 850 0 7 190clean landli landlicp # # poly ~ EOL
The PAL (Polygon Topology) file consists of repeating sets of polygon information. For single-precision, the first line of each set has five numbers:
The subsequent lines of a set give information on the arcs which comprise the polygon. There are three numbers per arc with information for two arcs per line.
The first polygon given is the universal polygon.
"The PAL file contains the polygon topology for a coverage and min-max boxes for the polygons. For each polygon in a coverage the PAL file has a (usually) clockwise list of the arcs, nodes that comprise the polygons, as well as the adjacent polygons, and a min-max box. To keep a continuous list, 'virtual' arcs with arc# of 0 are used to connect to holes (thus forming donuts), which are connected in counter-clockwise order. The PAL file is a random access, variable record length file, with the length dependent on the number of arcs surrounding the polygon (1 to 10000).
The arc# in the PAL file is the record number of that arc within the coverage's ARC file, the node# is the same as the node# in the arc file at the appropriate end, and the polygon# is the record number of that polygon within the coverage's PAL file. The PAL file record number for a polygon is the same as the PAT file record number and the CNT file record number." SDL documentation, July 1989, p. 24.
An example of an actual PAL section follows:
PAL 2
5 3.4009988E+05 4.1000000E+06 3.4090012E+05 4.1003995E+06
0 0 0 -1 1 2
-7 2 3 -6 5 3
-3 4 2
4 3.4009988E+05 4.1001995E+06 3.4090012E+05 4.1003995E+06
1 2 1 3 1 1
4 4 4 2 3 3
4 3.4019978E+05 4.1000000E+06 3.4079997E+05 4.1001998E+06
-2 2 2 5 3 4
6 4 1 7 5 1
2 3.4050000E+05 4.1001002E+06 3.4070003E+05 4.1001998E+06
-4 3 2 -5 4 3
-1 0 0 0 0 0 0
An example of a double precision PAL section follows:
PAL 3
375-1.80000000000000E+02-9.00000000000000E+01
1.80000000000000E+02 8.35960388183594E+01
0 0 0 304 401 242
0 0 0 -305 399 241
...
...
...
2-1.80000000000000E+02 6.43997573852539E+01
-1.69628768920898E+02 6.89338989257812E+01
-332 428 1 -333 424 1
1-7.70438766479492E+01 6.72657470703125E+01
-7.49158401489258E+01 6.83600692749023E+01
-329 253 1
7-1.80000000000000E+02-9.00000000000000E+01
1.80000000000000E+02-6.32283134460449E+01
579 389 1 584 390 1
583 394 1 585 395 1
586 396 1 -588 430 1
587 429 1
-1 0 0 0 0 0 0
0.00000000000000E+00 0.00000000000000E+00
Note that the last line of the section (-1 plus 6 zeros) is followed by an extra line. IMHO, this line does not really belong there, but it has to be taken into account when reading the E00 file!!!
The PRJ (Projection Parameters) file consists of a set of projection keywords and values including a set of parameters following the keyword "Parameters".
This file needs further research for specific keywords and parameters for the projections supported by ADS and MOSS.
An example of an actual PRJ section follows:
PRJ 2 Projection UTM ~ Zone 13 ~ Datum NAD27 ~ Zunits NO ~ Units METERS ~ Spheroid CLARKE1866 ~ Xshift 0.0000000000 ~ Yshift 0.0000000000 ~ Parameters ~ EOP
Spatial Index
It usually is comprised of a single line with the value "EOX".
An example of an actual SIN section follows:
SIN 2 EOX
This consists of ten lines with a tolerance type, a tolerance status, and a tolerance value on each line. The tolerance types are:
The tolerance status "is set to 1 if the tolerance is verified (been applied to operations of the coverage) and to 2 if the tolerance is not verified (been set by the TOLERANCE command, but not yet used in processing)."
An example of an actual TOL section follows:
TOL 2
1 1 8.1813842E-01
2 2 0.0000000E+00
3 2 0.0000000E+00
4 1 0.0000000E+00
5 2 0.0000000E+00
6 2 8.0025000E+00
7 2 8.0025000E-01
8 2 8.0025000E-01
9 2 8.0025000E-01
10 2 8.0025000E-01
-1 0 0 0 0 0 0
An example of a double-precision TOL section follows:
TOL 3
1 2 8.00000000000000E-02
2 2 0.00000000000000E+00
3 2 0.00000000000000E+00
4 2 0.00000000000000E+00
5 2 0.00000000000000E+00
6 2 8.00000000000000E+00
7 2 8.00000000000000E-01
8 2 8.00000000000000E-01
9 2 8.00000000000000E-01
10 2 8.00000000000000E-01
-1 0 0 0 0 0 0
Note that this section does not always contain ten lines, as we can see in the following example:
TOL 2
1 1 2.0000000E+00
4 2 0.0000000E-01
-1 0 0 0 0 0 0
A TXT section starts with "TXT 2" or "TXT 3" and ends with the usual "-1 0 0 0 0 0 0" line.
Here is an example of an empty TXT section... (not very useful, I know, but it at least confirms that empty TXT sections can exist!):
TXT 2
-1 0 0 0 0 0 0
Here is a double-precision TXT section:
TXT 3
1 1 0 21 2
5.92753812500000E+05 0.00000000000000E+00 0.00000000000000E+00
0.00000000000000E+00 6.09405200000000E+06 0.00000000000000E+00
0.00000000000000E+00 0.00000000000000E+00 0.00000000000000E+00
0.00000000000000E+00 0.00000000000000E+00 0.00000000000000E+00
0.00000000000000E+00 0.00000000000000E+00 8.00000000000000E+01
-1.0000000E+02
AB
1 1 0 21 3
5.98056937500000E+05 0.00000000000000E+00 0.00000000000000E+00
0.00000000000000E+00 6.08779850000000E+06 0.00000000000000E+00
0.00000000000000E+00 0.00000000000000E+00 0.00000000000000E+00
0.00000000000000E+00 0.00000000000000E+00 0.00000000000000E+00
0.00000000000000E+00 0.00000000000000E+00 8.00000000000000E+01
-1.0000000E+02
ABC
-1 0 0 0 0 0 0
And this is an entry from a single-precision TXT:
TXT 2
0 2 0 0 6
5.8053578E+05 5.8293578E+05 0.0000000E+00 0.0000000E+00 2.1061998E+06
2.1061998E+06 0.0000000E+00 0.0000000E+00 0.0000000E+00 0.0000000E+00
0.0000000E+00 0.0000000E+00 0.0000000E+00 0.0000000E+00 5.0000000E+02
-1.0000000E+02
ABCDEF
-1 0 0 0 0 0 0
TX6/TX7 sections start with "TX6 2", etc. and end with a line with the word "JABBERWOCKY". They can contain several sub-sections (subclasses), each sub-section start with a line with the subclass name and ends with a "-1 0 0 0 0 0 0" line. The main (and only?) difference between TX6 and TX7 sections is that the first line of each entry in a TX7 section has one more value (8 values instead of 7).
Here is one entry from a single-precision TX7 section:
89 1 3 2 2 0 10 0
5 0 0 0 0 0 0
0 0 0 0 0 0 0
0 0 0 0 0 0
1 0 0 0 0 0 0
0 0 0 0 0 0 0
0 0 0 0 0 0
-1.0000000E+02
5.0997402E-04 0.0000000E+00 0.0000000E+00
-1.1926495E+02 5.0306187E+01
-1.1926391E+02 5.0306408E+01
-1.1926808E+02 5.0305916E+01
-1.1926808E+02 5.0305916E+01
-1.1926457E+02 5.0305916E+01
AB DEFGHIJ
Note about text justification:
If you look at the image e00_textjust.gif, the red line indicates the line defined by the coordinates of the text feature. The blue dot is the point of the line to which the text is aligned, and the black number is the actual text. Justifications (1,2,3) place text above the line, (4,5,6) place it centered on the line, and (7,8,9) place the text below the line. Horizontally, (1,4,7) left-align the text to the first coordinate of the text line, (2,5,8) center-align the text to the midpoint of the text line, and (3,6,9) right-align the text to the last coordinate of the line.
A TX6 section in a double-precision coverage:
TX6 3
STREETS
1 1 2 0 5 0 7
1 0 0 0 0 0 0
0 0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0 0
0 0 0 0 0 0 0
0 0 0 0 0 0
-1.0000000E+02
6.00000000000000E+00 0.00000000000000E+00 0.00000000000000E+00
4.47348339990000E+06 5.33074571997000E+06
4.47348339990000E+06 5.33074571997000E+06
ABCDEFG
2 1 3 0 5 0 18
1 0 0 0 0 0 0
0 0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0 0
0 0 0 0 0 0 0
0 0 0 0 0 0
-1.0000000E+02
3.50000000000000E+00 0.00000000000000E+00 0.00000000000000E+00
4.47347279980000E+06 5.33087457983000E+06
4.47347279980000E+06 5.33087457983000E+06
4.47351938175583E+06 5.33083216377889E+06
ABCDEFGHI JKLMNOPQ
-1 0 0 0 0 0 0
DESC
497 2 2 0 1 0 10
1 0 0 0 0 0 0
0 0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0 0
0 0 0 0 0 0 0
0 0 0 0 0 0
-1.0000000E+02
2.50000000000000E+00 0.00000000000000E+00 0.00000000000000E+00
4.47363686987000E+06 5.33098710986000E+06
4.47363686987000E+06 5.33098710986000E+06
ABCDEFGHIJ
-1 0 0 0 0 0 0
JABBERWOCKY
RXP sections are specific to region coverages. They contains sub-sections, corresponding to the region subclasses. As for the other sections of this type, it ends with a "JABBERWOCKY" line.
The RXP section seems to connect the region ids for each subclass to the polygons (from the PAL section) that are part of each region. The first column would be the region IDs, and the second column the corresponding PAL polygon IDs...
The format is quite simple:
RXP 2
NAME1
1 159
-1 0
OTHER_NAME
1 214
1 216
1 217
1 218
1 222
1 226
1 227
-1 0
LAST_NAME
1 28
1 31
1 36
1 47
1 48
-1 0
JABBERWOCKY
RPL sections are also specific to region coverages. The RPL section contains one or more subsections (called subclasses in Arc/Info)... like for all other section types that contain subclasses, it ends with a JABBERWOCKY line. Each region subclass is in the exact same format as a PAL section, the difference is that each entry in a RPL subclass seems to contain the list of arcs that define a region and not a single polygon.
Here is an example of a single-precision RPL section:
RPL 2
NAME1
8 7.0712538E+05 6.1982350E+06 7.3062950E+05 6.2321335E+06
677 548 0 -671 543 0
-670 542 0 632 513 0
631 510 0 -660 504 0
-686 535 0 -676 547 0
-1 0 0 0 0 0 0
OTHER_NAME
20 3.0415478E+05 5.9847795E+06 3.6067356E+05 6.0342510E+06
-876 709 0 -877 706 0
0 0 0 913 731 0
886 715 0 879 711 0
-881 707 0 -883 712 0
-912 713 0 -919 730 0
-920 735 0 0 0 0
-935 745 0 -936 746 0
-931 738 0 -934 744 0
0 0 0 -928 741 0
-929 742 0 -927 740 0
-1 0 0 0 0 0 0
LAST_NAME
215 3.1433966E+05 6.0253455E+06 6.7686263E+05 6.5089305E+06
112 89 0 0 0 0
115 85 0 114 91 0
104 76 0 0 0 0
169 103 0 168 139 0
...
...
-1 0 0 0 0 0 0
JABBERWOCKY
INFO files follow the same format:
The name line consists of six fields:
Note: the values inside brackets are the start-end position of the field in the line.
The definitions for each attribute consist of eight fields:
The output format field is handled differently for numeric and character attributes. Numeric attributes give the output width followed by a space then the number of decimal positions. Character attributes give the output width followed by a constant of '-1'.
The type of the attribute is specified by the following codes:
10-1 (D) Date (stored as 8 bytes, display width must be either 8 chars (12/31/99) or 10 chars (12/31/1999) ) 20-1 (C) Character string 30-1 (I) Integer with fixed number of digits (1 byte storage per digit) 40-1 (N) Numeric value with decimals and fixed number of digits (using 1 byte storage per digit in memory) 50-1 (B) Binary integer (2 or 4 bytes) 60-1 (F) Binary float (4 or 8 bytes, depends on coverage precision)
Here is the form that each data type takes in the data records of an E00 INFO table:
10 (D) 8 characters
20 (C) Nbr of chars = attribute size (field 2 in attr. def. line).
30 (I) Nbr of chars = attribute size (field 2 in attr. def. line),
value is right-justified
40 (N) stored as single prec. floats = 14 chars, ex: "-1.7735416E+00"
(Uses 1 byte storage per digit internally, but always stored
as single precision floats in both single and double
precision E00 tables.)
50 (B) 32 bits integer = 11 chars total, right-justified
16 bits integer = 6 chars total, right-justified
60 (F) single prec. = 14 chars total, ex: "-1.7735416E+00"
double prec. = 24 chars total, ex: "-2.60358875000000000E+05"
Note that it is possible to have 4 bytes binary floats inside double-precision tables, or to have 8 bytes binary floats inside single-precision tables. The representation used for the Binary float values inside the E00 table data records is on 14 chars for 4 byte floats, and 24 chars for 8 byte floats, independently of the precision of the coverage. (eg. 4 bytes floats would use 14 chars (-1.7735416E+00) even inside a double-precision table, and 8 byte floats will always use 24 chars, even inside single-precision tables).
Formats will be given for the most common INFO files:
The .AAT (Arc Attribute Table) contains seven fields whose attribute names are self-explanatory. However, additional attributes may be added as desired, after the -ID attribute.
An example of an actual .AAT section follows:
LANDLICL.AAT XX 7 7 28 7
FNODE# 4-1 14-1 5-1 50-1 -1 -1-1 1-
TNODE# 4-1 54-1 5-1 50-1 -1 -1-1 2-
LPOLY# 4-1 94-1 5-1 50-1 -1 -1-1 3-
RPOLY# 4-1 134-1 5-1 50-1 -1 -1-1 4-
LENGTH 4-1 174-1 12 3 60-1 -1 -1-1 5-
LANDLICL# 4-1 214-1 5-1 50-1 -1 -1-1 6-
LANDLICL-ID 4-1 254-1 5-1 50-1 -1 -1-1 7-
2 1 0 0 2.0006265E+02 1
2
3 2 0 0 2.0006250E+02 2
3
1 4 0 0 1.0989176E+03 3
1
4 3 0 0 2.0003140E+02 4
4
3 4 0 0 2.8198248E+02 5
6
4 5 0 0 8.2309576E+02 6
7
5 2 0 0 2.2345322E+02 7
5
The .ACODE (Arc Lookup Table) contains seven fields whose attribute names are the same (except the -ID) as that in the ADS files documentation. However, additional attributes should be able to be be added as desired, after the LABEL attribute.
An example of an actual .ACODE section follows:
LANDLICP.ACODE 8 8 80 7
LANDLICP-ID 4-1 14-1 8-1 50-1 -1 -1-1 1-
XLABEL 4-1 54-1 8 2 60-1 -1 -1-1 2-
YLABEL 4-1 94-1 8 2 60-1 -1 -1-1 3-
SIZE 4-1 134-1 8 2 60-1 -1 -1-1 4-
ANGLE 4-1 174-1 8 2 60-1 -1 -1-1 5-
SZLBL 4-1 214-1 4-1 50-1 -1 -1-1 6-
IFONTF 4-1 254-1 4-1 50-1 -1 -1-1 7-
LABEL 52-1 294-1 52-1 20-1 -1 -1-1 8-
1 0.0000000E+00 0.0000000E+00 0.0000000E+00 0.0000000E+00 0
0
2 0.0000000E+00 0.0000000E+00 0.0000000E+00 0.0000000E+00 0
0
3 0.0000000E+00 0.0000000E+00 0.0000000E+00 0.0000000E+00 0
0
4 0.0000000E+00 0.0000000E+00 0.0000000E+00 0.0000000E+00 0
0
5 0.0000000E+00 0.0000000E+00 0.0000000E+00 0.0000000E+00 0
0
6 0.0000000E+00 0.0000000E+00 0.0000000E+00 0.0000000E+00 0
0
7 0.0000000E+00 0.0000000E+00 0.0000000E+00 0.0000000E+00 0
0
The .BND (Coverage Min/Max Coordinates) table contains four fields whose attribute names are self-explanatory.
An example of an actual .BND section follows:
LANDLICP.BND XX 4 4 16 1 XMIN 4-1 14-1 12 3 60-1 -1 -1-1 1- YMIN 4-1 54-1 12 3 60-1 -1 -1-1 2- XMAX 4-1 94-1 12 3 60-1 -1 -1-1 3- YMAX 4-1 134-1 12 3 60-1 -1 -1-1 4- 3.4009988E+05 4.1000000E+06 3.4090012E+05 4.1003995E+06
An example of a double-precision .BND section follows:
STDFIG11CPX.BND XX 4 4 32 1 XMIN 8-1 14-1 18 5 60-1 -1 -1-1 1- YMIN 8-1 94-1 18 5 60-1 -1 -1-1 2- XMAX 8-1 174-1 18 5 60-1 -1 -1-1 3- YMAX 8-1 254-1 18 5 60-1 -1 -1-1 4- 3.40100000000000000E+05 4.10000000000000000E+06 3.40900000000000000E+05 4.10040 000000000000E+06
The .PAT (Polygon or Point Attribute Table) contains four fields whose attribute names are self-explanatory. However, additional attributes may be added as desired, after the -ID attribute.
An example of an actual .PAT section follows:
LANDLICP.PAT XX 4 4 16 4 AREA 4-1 14-1 12 3 60-1 -1 -1-1 1- PERIMETER 4-1 54-1 12 3 60-1 -1 -1-1 2- LANDLICP# 4-1 94-1 5-1 50-1 -1 -1-1 3- LANDLICP-ID 4-1 134-1 5-1 50-1 -1 -1-1 4- -1.7982806E+05 2.3455293E+03 1 0 8.0025000E+04 1.6990741E+03 2 1 8.9864000E+04 1.5285940E+03 3 2 9.9390586E+03 4.8201389E+02 4 0
An example of a double-precision .PAT section follows:
STDFIG11CPX.PAT XX 5 5 54 3 AREA 8-1 14-1 18 5 60-1 -1 -1-1 1- PERIMETER 8-1 94-1 18 5 60-1 -1 -1-1 2- STDFIG11CPX# 4-1 174-1 5-1 50-1 -1 -1-1 3- STDFIG11CPX-ID 4-1 214-1 5-1 50-1 -1 -1-1 4- DATA 30-1 254-1 30-1 20-1 -1 -1-1 5- -1.70000000000000000E+05 0.00000000000000000E+00 1 0 9.00000000000000000E+04 1.53005627441406250E+03 2 1SMALL 8.00000000000000000E+04 1.69907165527343750E+03 3 2LARGE
The .PCODE (Polygon Lookup Table) contains eight fields whose attribute names are the same (except the -ID) as that in the ADS files documentation. However, additional attributes should be able to be be added as desired, after the LABEL attribute.
An example of an actual .PCODE section follows:
LANDLICP.PCODE 8 8 80 2
LANDLICP-ID 4-1 14-1 8-1 50-1 -1 -1-1 1-
XLABEL 4-1 54-1 8 2 60-1 -1 -1-1 2-
YLABEL 4-1 94-1 8 2 60-1 -1 -1-1 3-
SIZE 4-1 134-1 8 2 60-1 -1 -1-1 4-
ANGLE 4-1 174-1 8 2 60-1 -1 -1-1 5-
SZLBL 4-1 214-1 4-1 50-1 -1 -1-1 6-
IFONTF 4-1 254-1 4-1 50-1 -1 -1-1 7-
LABEL 52-1 294-1 52-1 20-1 -1 -1-1 8-
1 1.6050000E+00 1.4490000E+00 7.0000000E-02 0.0000000E+00 5
0LARGE
2 1.6470000E+00 1.1520000E+00 7.0000000E-02 0.0000000E+00 5
0SMALL
The .TIC (Tic Coordinates) table contains three fields whose attribute names are self-explanatory.
An example of an actual .TIC section follows:
LANDLICP.TIC XX 3 3 12 4
IDTIC 4-1 14-1 5-1 50-1 -1 -1-1 1-
XTIC 4-1 54-1 12 3 60-1 -1 -1-1 2-
YTIC 4-1 94-1 12 3 60-1 -1 -1-1 3-
1 3.4009244E+05 4.1000002E+06
2 3.4010028E+05 4.1004150E+06
3 3.4090753E+05 4.1003998E+06
4 3.4089972E+05 4.0999850E+06
An example of a double-precision .TIC section follows:
STDFIG11CPX.TIC XX 3 3 20 4
IDTIC 4-1 14-1 5-1 50-1 -1 -1-1 1-
XTIC 8-1 54-1 18 5 60-1 -1 -1-1 2-
YTIC 8-1 134-1 18 5 60-1 -1 -1-1 3-
1 3.40900000000000000E+05 4.10000000000000000E+06
4 3.40900000000000000E+05 4.10040000000000000E+06
2 3.40100000000000000E+05 4.10000000000000000E+06
3 3.40100000000000000E+05 4.10040000000000000E+06
The content and format of the ARC EXPORT file seems to be straightforward in most cases. The remaining areas of uncertainty include:
However, none of these appears to be that serious, and the indicated formats should be used to identify any errors or limitations.
Because this information was derived from limited experimentation, it should be considered as tentative and subject to revision at any time.
The following is a listing of an export file.
EXP 0 /HOME/ME/ARC/SAMPLE.E00
ARC 2
1 1 0 0 0 0 4
3.4009988E+05 4.1002000E+06 3.4040006E+05 4.1003995E+06
3.4090012E+05 4.1002000E+06 3.4070003E+05 4.1001995E+06
2 2 0 0 0 0 2
3.4029994E+05 4.1001998E+06 3.4009988E+05 4.1002000E+06
3 3 0 0 0 0 2
3.4050000E+05 4.1001998E+06 3.4029994E+05 4.1001998E+06
4 4 0 0 0 0 2
3.4070003E+05 4.1001995E+06 3.4050000E+05 4.1001998E+06
5 5 0 0 0 0 2
3.4019978E+05 4.1000000E+06 3.4029994E+05 4.1001998E+06
6 6 0 0 0 0 3
3.4050000E+05 4.1001998E+06 3.4059997E+05 4.1001002E+06
3.4070003E+05 4.1001995E+06
7 7 0 0 0 0 3
3.4070003E+05 4.1001995E+06 3.4079997E+05 4.1000002E+06
3.4019978E+05 4.1000000E+06
-1 0 0 0 0 0 0
LAB 2
1 0 3.4046650E+05 4.1002668E+06
3.4046650E+05 4.1002668E+06 3.4046650E+05 4.1002668E+06
2 0 3.4048869E+05 4.1000852E+06
3.4048869E+05 4.1000852E+06 3.4048869E+05 4.1000852E+06
-1 0 0.0000000E+00 0.0000000E+00
TOL 2
1 2 8.0756250E-02
2 2 0.0000000E+00
3 2 0.0000000E+00
4 2 0.0000000E+00
5 2 0.0000000E+00
6 2 8.0756250E+00
7 2 8.0756250E-01
8 2 8.0756250E-01
9 2 8.0756250E-01
10 2 8.0756250E-01
-1 0 0 0 0 0 0
SIN 2
EOX
PRJ 2
Projection UTM
~
Zone 13
~
Datum NAD27
~
Zunits NO
~
Units METERS
~
Spheroid CLARKE1866
~
Xshift 0.0000000000
~
Yshift 0.0000000000
~
Parameters
~
EOP
IFO 2
LANDLI.ACODE 8 8 80 7
LANDLI-ID 4-1 14-1 8-1 50-1 -1 -1-1 1-
XLABEL 4-1 54-1 8 2 60-1 -1 -1-1 2-
YLABEL 4-1 94-1 8 2 60-1 -1 -1-1 3-
SIZE 4-1 134-1 8 2 60-1 -1 -1-1 4-
ANGLE 4-1 174-1 8 2 60-1 -1 -1-1 5-
SZLBL 4-1 214-1 4-1 50-1 -1 -1-1 6-
IFONTF 4-1 254-1 4-1 50-1 -1 -1-1 7-
LABEL 52-1 294-1 52-1 20-1 -1 -1-1 8-
1 0.0000000E+00 0.0000000E+00 0.0000000E+00 0.0000000E+00 0
0
2 0.0000000E+00 0.0000000E+00 0.0000000E+00 0.0000000E+00 0
0
3 0.0000000E+00 0.0000000E+00 0.0000000E+00 0.0000000E+00 0
0
4 0.0000000E+00 0.0000000E+00 0.0000000E+00 0.0000000E+00 0
0
5 0.0000000E+00 0.0000000E+00 0.0000000E+00 0.0000000E+00 0
0
6 0.0000000E+00 0.0000000E+00 0.0000000E+00 0.0000000E+00 0
0
7 0.0000000E+00 0.0000000E+00 0.0000000E+00 0.0000000E+00 0
0
LANDLI.BND XX 4 4 16 1
XMIN 4-1 14-1 12 3 60-1 -1 -1-1 1-
YMIN 4-1 54-1 12 3 60-1 -1 -1-1 2-
XMAX 4-1 94-1 12 3 60-1 -1 -1-1 3-
YMAX 4-1 134-1 12 3 60-1 -1 -1-1 4-
3.4009612E+05 4.0999870E+06 3.4090369E+05 4.1004052E+06
LANDLI.PCODE 8 8 80 2
LANDLI-ID 4-1 14-1 8-1 50-1 -1 -1-1 1-
XLABEL 4-1 54-1 8 2 60-1 -1 -1-1 2-
YLABEL 4-1 94-1 8 2 60-1 -1 -1-1 3-
SIZE 4-1 134-1 8 2 60-1 -1 -1-1 4-
ANGLE 4-1 174-1 8 2 60-1 -1 -1-1 5-
SZLBL 4-1 214-1 4-1 50-1 -1 -1-1 6-
IFONTF 4-1 254-1 4-1 50-1 -1 -1-1 7-
LABEL 52-1 294-1 52-1 20-1 -1 -1-1 8-
1 1.6050000E+00 1.4490000E+00 7.0000000E-02 0.0000000E+00 5
0LARGE
2 1.6470000E+00 1.1520000E+00 7.0000000E-02 0.0000000E+00 5
0SMALL
LANDLI.TIC XX 3 3 12 4
IDTIC 4-1 14-1 5-1 50-1 -1 -1-1 1-
XTIC 4-1 54-1 12 3 60-1 -1 -1-1 2-
YTIC 4-1 94-1 12 3 60-1 -1 -1-1 3-
1 3.4009244E+05 4.1000002E+06
2 3.4010028E+05 4.1004150E+06
3 3.4090753E+05 4.1003998E+06
4 3.4089972E+05 4.0999850E+06
EOI
EOS
EXP 0 /HOME/ME/SAMPLE.E00
ARC 2
1 2 2 1 1 2 2
3.4029994E+05 4.1001998E+06 3.4009988E+05 4.1002000E+06
2 3 3 2 3 2 2
3.4050000E+05 4.1001998E+06 3.4029994E+05 4.1001998E+06
3 1 1 4 1 2 4
3.4009988E+05 4.1002000E+06 3.4040006E+05 4.1003995E+06
3.4090012E+05 4.1002000E+06 3.4070003E+05 4.1001995E+06
4 4 4 3 4 2 2
3.4070003E+05 4.1001995E+06 3.4050000E+05 4.1001998E+06
5 6 3 4 4 3 3
3.4050000E+05 4.1001998E+06 3.4059997E+05 4.1001002E+06
3.4070003E+05 4.1001995E+06
6 7 4 5 1 3 3
3.4070003E+05 4.1001995E+06 3.4079997E+05 4.1000002E+06
3.4019978E+05 4.1000000E+06
7 5 5 2 1 3 2
3.4019978E+05 4.1000000E+06 3.4029994E+05 4.1001998E+06
-1 0 0 0 0 0 0
CNT 2
0 3.4048516E+05 4.1001702E+06
1 3.4046691E+05 4.1002662E+06
1
1 3.4048875E+05 4.1000852E+06
2
0 3.4060000E+05 4.1001665E+06
-1 0 0 0 0 0 0
LAB 2
1 2 3.4046650E+05 4.1002668E+06
3.4046650E+05 4.1002668E+06 3.4046650E+05 4.1002668E+06
2 3 3.4048869E+05 4.1000852E+06
3.4048869E+05 4.1000852E+06 3.4048869E+05 4.1000852E+06
-1 0 0.0000000E+00 0.0000000E+00
PAL 2
5 3.4009988E+05 4.1000000E+06 3.4090012E+05 4.1003995E+06
0 0 0 -1 1 2
-7 2 3 -6 5 3
-3 4 2
4 3.4009988E+05 4.1001995E+06 3.4090012E+05 4.1003995E+06
1 2 1 3 1 1
4 4 4 2 3 3
4 3.4019978E+05 4.1000000E+06 3.4079997E+05 4.1001998E+06
-2 2 2 5 3 4
6 4 1 7 5 1
2 3.4050000E+05 4.1001002E+06 3.4070003E+05 4.1001998E+06
-4 3 2 -5 4 3
-1 0 0 0 0 0 0
TOL 2
1 1 8.1813842E-01
2 2 0.0000000E+00
3 2 0.0000000E+00
4 1 0.0000000E+00
5 2 0.0000000E+00
6 2 8.0025000E+00
7 2 8.0025000E-01
8 2 8.0025000E-01
9 2 8.0025000E-01
10 2 8.0025000E-01
-1 0 0 0 0 0 0
SIN 2
EOX
LOG 2
19940118 849 0 3 35export cover landli stdfigc none
~
19940118 850 0 7 190clean landli landlicp # # poly
~
EOL
PRJ 2
Projection UTM
~
Zone 13
~
Datum NAD27
~
Zunits NO
~
Units METERS
~
Spheroid CLARKE1866
~
Xshift 0.0000000000
~
Yshift 0.0000000000
~
Parameters
~
EOP
IFO 2
LANDLICP.ACODE 8 8 80 7
LANDLICP-ID 4-1 14-1 8-1 50-1 -1 -1-1 1-
XLABEL 4-1 54-1 8 2 60-1 -1 -1-1 2-
YLABEL 4-1 94-1 8 2 60-1 -1 -1-1 3-
SIZE 4-1 134-1 8 2 60-1 -1 -1-1 4-
ANGLE 4-1 174-1 8 2 60-1 -1 -1-1 5-
SZLBL 4-1 214-1 4-1 50-1 -1 -1-1 6-
IFONTF 4-1 254-1 4-1 50-1 -1 -1-1 7-
LABEL 52-1 294-1 52-1 20-1 -1 -1-1 8-
1 0.0000000E+00 0.0000000E+00 0.0000000E+00 0.0000000E+00 0
0
2 0.0000000E+00 0.0000000E+00 0.0000000E+00 0.0000000E+00 0
0
3 0.0000000E+00 0.0000000E+00 0.0000000E+00 0.0000000E+00 0
0
4 0.0000000E+00 0.0000000E+00 0.0000000E+00 0.0000000E+00 0
0
5 0.0000000E+00 0.0000000E+00 0.0000000E+00 0.0000000E+00 0
0
6 0.0000000E+00 0.0000000E+00 0.0000000E+00 0.0000000E+00 0
0
7 0.0000000E+00 0.0000000E+00 0.0000000E+00 0.0000000E+00 0
0
LANDLICP.BND XX 4 4 16 1
XMIN 4-1 14-1 12 3 60-1 -1 -1-1 1-
YMIN 4-1 54-1 12 3 60-1 -1 -1-1 2-
XMAX 4-1 94-1 12 3 60-1 -1 -1-1 3-
YMAX 4-1 134-1 12 3 60-1 -1 -1-1 4-
3.4009988E+05 4.1000000E+06 3.4090012E+05 4.1003995E+06
LANDLICP.PAT XX 4 4 16 4
AREA 4-1 14-1 12 3 60-1 -1 -1-1 1-
PERIMETER 4-1 54-1 12 3 60-1 -1 -1-1 2-
LANDLICP# 4-1 94-1 5-1 50-1 -1 -1-1 3-
LANDLICP-ID 4-1 134-1 5-1 50-1 -1 -1-1 4-
-1.7982806E+05 2.3455293E+03 1 0
8.0025000E+04 1.6990741E+03 2 1
8.9864000E+04 1.5285940E+03 3 2
9.9390586E+03 4.8201389E+02 4 0
LANDLICP.PCODE 8 8 80 2
LANDLICP-ID 4-1 14-1 8-1 50-1 -1 -1-1 1-
XLABEL 4-1 54-1 8 2 60-1 -1 -1-1 2-
YLABEL 4-1 94-1 8 2 60-1 -1 -1-1 3-
SIZE 4-1 134-1 8 2 60-1 -1 -1-1 4-
ANGLE 4-1 174-1 8 2 60-1 -1 -1-1 5-
SZLBL 4-1 214-1 4-1 50-1 -1 -1-1 6-
IFONTF 4-1 254-1 4-1 50-1 -1 -1-1 7-
LABEL 52-1 294-1 52-1 20-1 -1 -1-1 8-
1 1.6050000E+00 1.4490000E+00 7.0000000E-02 0.0000000E+00 5
0LARGE
2 1.6470000E+00 1.1520000E+00 7.0000000E-02 0.0000000E+00 5
0SMALL
LANDLICP.TIC XX 3 3 12 4
IDTIC 4-1 14-1 5-1 50-1 -1 -1-1 1-
XTIC 4-1 54-1 12 3 60-1 -1 -1-1 2-
YTIC 4-1 94-1 12 3 60-1 -1 -1-1 3-
1 3.4009244E+05 4.1000002E+06
2 3.4010028E+05 4.1004150E+06
3 3.4090753E+05 4.1003998E+06
4 3.4089972E+05 4.0999850E+06
EOI
EOS
EXP 0 /HOME/ME/SAMPLE.E00
ARC 2
1 2 2 1 -1 -1 2
3.4029994E+05 4.1001998E+06 3.4009988E+05 4.1002000E+06
2 3 3 2 -1 -1 2
3.4050000E+05 4.1001998E+06 3.4029994E+05 4.1001998E+06
3 1 1 4 -1 -1 4
3.4009988E+05 4.1002000E+06 3.4040006E+05 4.1003995E+06
3.4090012E+05 4.1002000E+06 3.4070003E+05 4.1001995E+06
4 4 4 3 -1 -1 2
3.4070003E+05 4.1001995E+06 3.4050000E+05 4.1001998E+06
5 6 3 4 -1 -1 3
3.4050000E+05 4.1001998E+06 3.4059997E+05 4.1001002E+06
3.4070003E+05 4.1001995E+06
6 7 4 5 -1 -1 3
3.4070003E+05 4.1001995E+06 3.4079997E+05 4.1000002E+06
3.4019978E+05 4.1000000E+06
7 5 5 2 -1 -1 2
3.4019978E+05 4.1000000E+06 3.4029994E+05 4.1001998E+06
-1 0 0 0 0 0 0
LAB 2
1 0 3.4046650E+05 4.1002668E+06
3.4046650E+05 4.1002668E+06 3.4046650E+05 4.1002668E+06
2 0 3.4048869E+05 4.1000852E+06
3.4048869E+05 4.1000852E+06 3.4048869E+05 4.1000852E+06
-1 0 0.0000000E+00 0.0000000E+00
TOL 2
1 1 8.1813842E-01
2 2 0.0000000E+00
3 2 0.0000000E+00
4 1 0.0000000E+00
5 2 0.0000000E+00
6 2 8.0756250E+00
7 2 8.0756250E-01
8 2 8.0756250E-01
9 2 8.0756250E-01
10 2 8.0756250E-01
-1 0 0 0 0 0 0
SIN 2
EOX
LOG 2
19940118 849 0 3 35export cover landli stdfigc none
~
19940118 851 0 7 145clean landli landlicl # # line
~
EOL
PRJ 2
Projection UTM
~
Zone 13
~
Datum NAD27
~
Zunits NO
~
Units METERS
~
Spheroid CLARKE1866
~
Xshift 0.0000000000
~
Yshift 0.0000000000
~
Parameters
~
EOP
IFO 2
LANDLICL.AAT XX 7 7 28 7
FNODE# 4-1 14-1 5-1 50-1 -1 -1-1 1-
TNODE# 4-1 54-1 5-1 50-1 -1 -1-1 2-
LPOLY# 4-1 94-1 5-1 50-1 -1 -1-1 3-
RPOLY# 4-1 134-1 5-1 50-1 -1 -1-1 4-
LENGTH 4-1 174-1 12 3 60-1 -1 -1-1 5-
LANDLICL# 4-1 214-1 5-1 50-1 -1 -1-1 6-
LANDLICL-ID 4-1 254-1 5-1 50-1 -1 -1-1 7-
2 1 0 0 2.0006265E+02 1
2
3 2 0 0 2.0006250E+02 2
3
1 4 0 0 1.0989176E+03 3
1
4 3 0 0 2.0003140E+02 4
4
3 4 0 0 2.8198248E+02 5
6
4 5 0 0 8.2309576E+02 6
7
5 2 0 0 2.2345322E+02 7
5
LANDLICL.ACODE 8 8 80 7
LANDLICL-ID 4-1 14-1 8-1 50-1 -1 -1-1 1-
XLABEL 4-1 54-1 8 2 60-1 -1 -1-1 2-
YLABEL 4-1 94-1 8 2 60-1 -1 -1-1 3-
SIZE 4-1 134-1 8 2 60-1 -1 -1-1 4-
ANGLE 4-1 174-1 8 2 60-1 -1 -1-1 5-
SZLBL 4-1 214-1 4-1 50-1 -1 -1-1 6-
IFONTF 4-1 254-1 4-1 50-1 -1 -1-1 7-
LABEL 52-1 294-1 52-1 20-1 -1 -1-1 8-
1 0.0000000E+00 0.0000000E+00 0.0000000E+00 0.0000000E+00 0
0
2 0.0000000E+00 0.0000000E+00 0.0000000E+00 0.0000000E+00 0
0
3 0.0000000E+00 0.0000000E+00 0.0000000E+00 0.0000000E+00 0
0
4 0.0000000E+00 0.0000000E+00 0.0000000E+00 0.0000000E+00 0
0
5 0.0000000E+00 0.0000000E+00 0.0000000E+00 0.0000000E+00 0
0
6 0.0000000E+00 0.0000000E+00 0.0000000E+00 0.0000000E+00 0
0
7 0.0000000E+00 0.0000000E+00 0.0000000E+00 0.0000000E+00 0
0
LANDLICL.BND XX 4 4 16 1
XMIN 4-1 14-1 12 3 60-1 -1 -1-1 1-
YMIN 4-1 54-1 12 3 60-1 -1 -1-1 2-
XMAX 4-1 94-1 12 3 60-1 -1 -1-1 3-
YMAX 4-1 134-1 12 3 60-1 -1 -1-1 4-
3.4009612E+05 4.0999870E+06 3.4090369E+05 4.1004052E+06
LANDLICL.PCODE 8 8 80 2
LANDLICL-ID 4-1 14-1 8-1 50-1 -1 -1-1 1-
XLABEL 4-1 54-1 8 2 60-1 -1 -1-1 2-
YLABEL 4-1 94-1 8 2 60-1 -1 -1-1 3-
SIZE 4-1 134-1 8 2 60-1 -1 -1-1 4-
ANGLE 4-1 174-1 8 2 60-1 -1 -1-1 5-
SZLBL 4-1 214-1 4-1 50-1 -1 -1-1 6-
IFONTF 4-1 254-1 4-1 50-1 -1 -1-1 7-
LABEL 52-1 294-1 52-1 20-1 -1 -1-1 8-
1 1.6050000E+00 1.4490000E+00 7.0000000E-02 0.0000000E+00 5
0LARGE
2 1.6470000E+00 1.1520000E+00 7.0000000E-02 0.0000000E+00 5
0SMALL
LANDLICL.TIC XX 3 3 12 4
IDTIC 4-1 14-1 5-1 50-1 -1 -1-1 1-
XTIC 4-1 54-1 12 3 60-1 -1 -1-1 2-
YTIC 4-1 94-1 12 3 60-1 -1 -1-1 3-
1 3.4009244E+05 4.1000002E+06
2 3.4010028E+05 4.1004150E+06
3 3.4090753E+05 4.1003998E+06
4 3.4089972E+05 4.0999850E+06
EOI
EOS
EXP 0 /HOME/SAMPLES/WELLS.E00
LAB 2
1 0 5.0494070E+06 4.4200809E+05
5.0494070E+06 4.4200809E+05 5.0494070E+06 4.4200809E+05
2 0 5.0537115E+06 4.3450244E+05
5.0537115E+06 4.3450244E+05 5.0537115E+06 4.3450244E+05
3 0 5.0458180E+06 4.4065578E+05
5.0458180E+06 4.4065578E+05 5.0458180E+06 4.4065578E+05
4 0 5.0413365E+06 4.3965969E+05
5.0413365E+06 4.3965969E+05 5.0413365E+06 4.3965969E+05
5 0 5.0391940E+06 4.3769166E+05
5.0391940E+06 4.3769166E+05 5.0391940E+06 4.3769166E+05
6 0 5.0471285E+06 4.3712497E+05
5.0471285E+06 4.3712497E+05 5.0471285E+06 4.3712497E+05
7 0 5.0398785E+06 4.3613550E+05
5.0398785E+06 4.3613550E+05 5.0398785E+06 4.3613550E+05
8 0 5.0398655E+06 4.3613762E+05
5.0398655E+06 4.3613762E+05 5.0398655E+06 4.3613762E+05
9 0 5.0398660E+06 4.3612434E+05
5.0398660E+06 4.3612434E+05 5.0398660E+06 4.3612434E+05
10 0 5.0385150E+06 4.3638369E+05
5.0385150E+06 4.3638369E+05 5.0385150E+06 4.3638369E+05
11 0 5.0390115E+06 4.3480209E+05
5.0390115E+06 4.3480209E+05 5.0390115E+06 4.3480209E+05
12 0 5.0441440E+06 4.3530462E+05
5.0441440E+06 4.3530462E+05 5.0441440E+06 4.3530462E+05
13 0 5.0352635E+06 4.4242825E+05
5.0352635E+06 4.4242825E+05 5.0352635E+06 4.4242825E+05
14 0 5.0293195E+06 4.3762103E+05
5.0293195E+06 4.3762103E+05 5.0293195E+06 4.3762103E+05
15 0 5.0300595E+06 4.3851244E+05
5.0300595E+06 4.3851244E+05 5.0300595E+06 4.3851244E+05
16 0 5.0370980E+06 4.3818822E+05
5.0370980E+06 4.3818822E+05 5.0370980E+06 4.3818822E+05
17 0 5.0370980E+06 4.3818822E+05
5.0370980E+06 4.3818822E+05 5.0370980E+06 4.3818822E+05
18 0 5.0366810E+06 4.3670638E+05
5.0366810E+06 4.3670638E+05 5.0366810E+06 4.3670638E+05
19 0 5.0375905E+06 4.3566803E+05
5.0375905E+06 4.3566803E+05 5.0375905E+06 4.3566803E+05
20 0 5.0370205E+06 4.3429197E+05
5.0370205E+06 4.3429197E+05 5.0370205E+06 4.3429197E+05
21 0 5.0533465E+06 4.3411053E+05
5.0533465E+06 4.3411053E+05 5.0533465E+06 4.3411053E+05
22 0 5.0514510E+06 4.3142975E+05
5.0514510E+06 4.3142975E+05 5.0514510E+06 4.3142975E+05
23 0 5.0567580E+06 4.3187972E+05
5.0567580E+06 4.3187972E+05 5.0567580E+06 4.3187972E+05
24 0 5.0567670E+06 4.2965009E+05
5.0567670E+06 4.2965009E+05 5.0567670E+06 4.2965009E+05
25 0 5.0566960E+06 4.2973056E+05
5.0566960E+06 4.2973056E+05 5.0566960E+06 4.2973056E+05
26 0 5.0549180E+06 4.3022238E+05
5.0549180E+06 4.3022238E+05 5.0549180E+06 4.3022238E+05
27 0 5.0506190E+06 4.3073538E+05
5.0506190E+06 4.3073538E+05 5.0506190E+06 4.3073538E+05
28 0 5.0489275E+06 4.2872991E+05
5.0489275E+06 4.2872991E+05 5.0489275E+06 4.2872991E+05
29 0 5.0486655E+06 4.2847866E+05
5.0486655E+06 4.2847866E+05 5.0486655E+06 4.2847866E+05
30 0 5.0517210E+06 4.2850744E+05
5.0517210E+06 4.2850744E+05 5.0517210E+06 4.2850744E+05
31 0 5.0535690E+06 4.2891612E+05
5.0535690E+06 4.2891612E+05 5.0535690E+06 4.2891612E+05
32 0 5.0536800E+06 4.2893353E+05
5.0536800E+06 4.2893353E+05 5.0536800E+06 4.2893353E+05
33 0 5.0536210E+06 4.2787484E+05
5.0536210E+06 4.2787484E+05 5.0536210E+06 4.2787484E+05
34 0 5.0548110E+06 4.2931866E+05
5.0548110E+06 4.2931866E+05 5.0548110E+06 4.2931866E+05
35 0 5.0548110E+06 4.2931866E+05
5.0548110E+06 4.2931866E+05 5.0548110E+06 4.2931866E+05
36 0 5.0544295E+06 4.2930706E+05
5.0544295E+06 4.2930706E+05 5.0544295E+06 4.2930706E+05
37 0 5.0542620E+06 4.2857597E+05
5.0542620E+06 4.2857597E+05 5.0542620E+06 4.2857597E+05
38 0 5.0555765E+06 4.2804956E+05
5.0555765E+06 4.2804956E+05 5.0555765E+06 4.2804956E+05
39 0 5.0555445E+06 4.2845644E+05
5.0555445E+06 4.2845644E+05 5.0555445E+06 4.2845644E+05
40 0 5.0556435E+06 4.2720366E+05
5.0556435E+06 4.2720366E+05 5.0556435E+06 4.2720366E+05
41 0 5.0559150E+06 4.2723225E+05
5.0559150E+06 4.2723225E+05 5.0559150E+06 4.2723225E+05
42 0 5.0543645E+06 4.2764378E+05
5.0543645E+06 4.2764378E+05 5.0543645E+06 4.2764378E+05
43 0 5.0542240E+06 4.2646362E+05
5.0542240E+06 4.2646362E+05 5.0542240E+06 4.2646362E+05
44 0 5.0530570E+06 4.2726859E+05
5.0530570E+06 4.2726859E+05 5.0530570E+06 4.2726859E+05
45 0 5.0530570E+06 4.2726859E+05
5.0530570E+06 4.2726859E+05 5.0530570E+06 4.2726859E+05
46 0 5.0537235E+06 4.2626819E+05
5.0537235E+06 4.2626819E+05 5.0537235E+06 4.2626819E+05
47 0 5.0508765E+06 4.2666153E+05
5.0508765E+06 4.2666153E+05 5.0508765E+06 4.2666153E+05
48 0 5.0500095E+06 4.2681334E+05
5.0500095E+06 4.2681334E+05 5.0500095E+06 4.2681334E+05
49 0 5.0497670E+06 4.2739416E+05
5.0497670E+06 4.2739416E+05 5.0497670E+06 4.2739416E+05
50 0 5.0501600E+06 4.2676775E+05
5.0501600E+06 4.2676775E+05 5.0501600E+06 4.2676775E+05
51 0 5.0490515E+06 4.2763362E+05
5.0490515E+06 4.2763362E+05 5.0490515E+06 4.2763362E+05
52 0 5.0485480E+06 4.2558822E+05
5.0485480E+06 4.2558822E+05 5.0485480E+06 4.2558822E+05
53 0 5.0487290E+06 4.2603975E+05
5.0487290E+06 4.2603975E+05 5.0487290E+06 4.2603975E+05
54 0 5.0497000E+06 4.2478025E+05
5.0497000E+06 4.2478025E+05 5.0497000E+06 4.2478025E+05
55 0 5.0513000E+06 4.2469978E+05
5.0513000E+06 4.2469978E+05 5.0513000E+06 4.2469978E+05
56 0 5.0510380E+06 4.2513288E+05
5.0510380E+06 4.2513288E+05 5.0510380E+06 4.2513288E+05
57 0 5.0397800E+06 4.3356584E+05
5.0397800E+06 4.3356584E+05 5.0397800E+06 4.3356584E+05
58 0 5.0401625E+06 4.3247184E+05
5.0401625E+06 4.3247184E+05 5.0401625E+06 4.3247184E+05
59 0 5.0401625E+06 4.3247184E+05
5.0401625E+06 4.3247184E+05 5.0401625E+06 4.3247184E+05
60 0 5.0401625E+06 4.3247184E+05
5.0401625E+06 4.3247184E+05 5.0401625E+06 4.3247184E+05
61 0 5.0401695E+06 4.3127716E+05
5.0401695E+06 4.3127716E+05 5.0401695E+06 4.3127716E+05
62 0 5.0408640E+06 4.3217603E+05
5.0408640E+06 4.3217603E+05 5.0408640E+06 4.3217603E+05
63 0 5.0445585E+06 4.3188038E+05
5.0445585E+06 4.3188038E+05 5.0445585E+06 4.3188038E+05
64 0 5.0451130E+06 4.3050697E+05
5.0451130E+06 4.3050697E+05 5.0451130E+06 4.3050697E+05
65 0 5.0425620E+06 4.3073538E+05
5.0425620E+06 4.3073538E+05 5.0425620E+06 4.3073538E+05
66 0 5.0405910E+06 4.3007469E+05
5.0405910E+06 4.3007469E+05 5.0405910E+06 4.3007469E+05
67 0 5.0442520E+06 4.2632441E+05
5.0442520E+06 4.2632441E+05 5.0442520E+06 4.2632441E+05
68 0 5.0442520E+06 4.2632441E+05
5.0442520E+06 4.2632441E+05 5.0442520E+06 4.2632441E+05
69 0 5.0442280E+06 4.2637753E+05
5.0442280E+06 4.2637753E+05 5.0442280E+06 4.2637753E+05
70 0 5.0438295E+06 4.2678347E+05
5.0438295E+06 4.2678347E+05 5.0438295E+06 4.2678347E+05
71 0 5.0406350E+06 4.2518522E+05
5.0406350E+06 4.2518522E+05 5.0406350E+06 4.2518522E+05
72 0 5.0284905E+06 4.3221456E+05
5.0284905E+06 4.3221456E+05 5.0284905E+06 4.3221456E+05
73 0 5.0306535E+06 4.2976247E+05
5.0306535E+06 4.2976247E+05 5.0306535E+06 4.2976247E+05
74 0 5.0292090E+06 4.3021500E+05
5.0292090E+06 4.3021500E+05 5.0292090E+06 4.3021500E+05
75 0 5.0304375E+06 4.2653141E+05
5.0304375E+06 4.2653141E+05 5.0304375E+06 4.2653141E+05
76 0 5.0296615E+06 4.2622000E+05
5.0296615E+06 4.2622000E+05 5.0296615E+06 4.2622000E+05
77 0 5.0293845E+06 4.2551788E+05
5.0293845E+06 4.2551788E+05 5.0293845E+06 4.2551788E+05
78 0 5.0285980E+06 4.2498803E+05
5.0285980E+06 4.2498803E+05 5.0285980E+06 4.2498803E+05
79 0 5.0304695E+06 4.2467572E+05
5.0304695E+06 4.2467572E+05 5.0304695E+06 4.2467572E+05
80 0 5.0314780E+06 4.2545294E+05
5.0314780E+06 4.2545294E+05 5.0314780E+06 4.2545294E+05
-1 0 0.0000000E+00 0.0000000E+00
TOL 2
1 2 2.8276500E+00
2 2 0.0000000E+00
3 2 0.0000000E+00
4 2 0.0000000E+00
5 2 0.0000000E+00
6 2 2.8276500E+02
7 2 2.8276500E+01
8 2 2.8276500E+01
9 2 2.8276500E+01
10 2 2.8276500E+01
-1 0 0 0 0 0 0
SIN 2
EOX
IFO 2
WELLS.BND XX 4 4 16 1
XMIN 4-1 14-1 12 3 60-1 -1 -1-1 1-
YMIN 4-1 54-1 12 3 60-1 -1 -1-1 2-
XMAX 4-1 94-1 12 3 60-1 -1 -1-1 3-
YMAX 4-1 134-1 12 3 60-1 -1 -1-1 4-
5.0284905E+06 4.2467572E+05 5.0567670E+06 4.4242825E+05
WELLS.PAT XX 5 5 46 80
AREA 4-1 14-1 12 3 60-1 -1 -1-1 1-
PERIMETER 4-1 54-1 12 3 60-1 -1 -1-1 2-
WELLS# 4-1 94-1 5-1 50-1 -1 -1-1 3-
WELLS-ID 4-1 134-1 5-1 50-1 -1 -1-1 4-
DATA 30-1 174-1 30-1 20-1 -1 -1-1 5-
0.0000000E+00 0.0000000E+00 1 105103084340000
0.0000000E+00 0.0000000E+00 2 205103052120000
0.0000000E+00 0.0000000E+00 3 305103083160000
0.0000000E+00 0.0000000E+00 4 405103085410000
0.0000000E+00 0.0000000E+00 5 505103086760000
0.0000000E+00 0.0000000E+00 6 605103052290000
0.0000000E+00 0.0000000E+00 7 705103089060000
0.0000000E+00 0.0000000E+00 8 805103089070000
0.0000000E+00 0.0000000E+00 9 905103089070001
0.0000000E+00 0.0000000E+00 10 1005103080820000
0.0000000E+00 0.0000000E+00 11 1105103083850000
0.0000000E+00 0.0000000E+00 12 1205103072380000
0.0000000E+00 0.0000000E+00 13 1305103087110000
0.0000000E+00 0.0000000E+00 14 1405103088380000
0.0000000E+00 0.0000000E+00 15 1505103084460000
0.0000000E+00 0.0000000E+00 16 1605103092180000
0.0000000E+00 0.0000000E+00 17 1705103092180001
0.0000000E+00 0.0000000E+00 18 1805103080830000
0.0000000E+00 0.0000000E+00 19 1905103081830000
0.0000000E+00 0.0000000E+00 20 2005103084410000
0.0000000E+00 0.0000000E+00 21 2105103070400000
0.0000000E+00 0.0000000E+00 22 2205103051910000
0.0000000E+00 0.0000000E+00 23 2305103076160000
0.0000000E+00 0.0000000E+00 24 2405103051610000
0.0000000E+00 0.0000000E+00 25 2505103086310000
0.0000000E+00 0.0000000E+00 26 2605103077600000
0.0000000E+00 0.0000000E+00 27 2705103051780000
0.0000000E+00 0.0000000E+00 28 2805103051500000
0.0000000E+00 0.0000000E+00 29 2905103077610000
0.0000000E+00 0.0000000E+00 30 3005103051460000
0.0000000E+00 0.0000000E+00 31 3105103070440000
0.0000000E+00 0.0000000E+00 32 3205103076590000
0.0000000E+00 0.0000000E+00 33 3305103090240000
0.0000000E+00 0.0000000E+00 34 3405103051560000
0.0000000E+00 0.0000000E+00 35 3505103051560001
0.0000000E+00 0.0000000E+00 36 3605103073550000
0.0000000E+00 0.0000000E+00 37 3705103077620000
0.0000000E+00 0.0000000E+00 38 3805103051380000
0.0000000E+00 0.0000000E+00 39 3905103051430000
0.0000000E+00 0.0000000E+00 40 4005103077540000
0.0000000E+00 0.0000000E+00 41 4105103087240000
0.0000000E+00 0.0000000E+00 42 4205103075630000
0.0000000E+00 0.0000000E+00 43 4305103076620000
0.0000000E+00 0.0000000E+00 44 4405103059900000
0.0000000E+00 0.0000000E+00 45 4505103059900001
0.0000000E+00 0.0000000E+00 46 4605103091290000
0.0000000E+00 0.0000000E+00 47 4705103073990000
0.0000000E+00 0.0000000E+00 48 4805103051220000
0.0000000E+00 0.0000000E+00 49 4905103080970000
0.0000000E+00 0.0000000E+00 50 5005103092520000
0.0000000E+00 0.0000000E+00 51 5105103051350000
0.0000000E+00 0.0000000E+00 52 5205103075060000
0.0000000E+00 0.0000000E+00 53 5305103092920000
0.0000000E+00 0.0000000E+00 54 5405103059910000
0.0000000E+00 0.0000000E+00 55 5505103050940000
0.0000000E+00 0.0000000E+00 56 5605103092090000
0.0000000E+00 0.0000000E+00 57 5705103082160000
0.0000000E+00 0.0000000E+00 58 5805103075270000
0.0000000E+00 0.0000000E+00 59 5905103075270001
0.0000000E+00 0.0000000E+00 60 6005103075270002
0.0000000E+00 0.0000000E+00 61 6105103076110000
0.0000000E+00 0.0000000E+00 62 6205103052000000
0.0000000E+00 0.0000000E+00 63 6305103084100000
0.0000000E+00 0.0000000E+00 64 6405103051740000
0.0000000E+00 0.0000000E+00 65 6505103088690000
0.0000000E+00 0.0000000E+00 66 6605103074560000
0.0000000E+00 0.0000000E+00 67 6705103051150000
0.0000000E+00 0.0000000E+00 68 6805103051150001
0.0000000E+00 0.0000000E+00 69 6905103051160000
0.0000000E+00 0.0000000E+00 70 7005103072340000
0.0000000E+00 0.0000000E+00 71 7105103072600000
0.0000000E+00 0.0000000E+00 72 7205103081900000
0.0000000E+00 0.0000000E+00 73 7305103078970000
0.0000000E+00 0.0000000E+00 74 7405103087180000
0.0000000E+00 0.0000000E+00 75 7505103080730000
0.0000000E+00 0.0000000E+00 76 7605103089900000
0.0000000E+00 0.0000000E+00 77 7705103078320000
0.0000000E+00 0.0000000E+00 78 7805103088630000
0.0000000E+00 0.0000000E+00 79 7905103080740000
0.0000000E+00 0.0000000E+00 80 8005103084150000
WELLS.TIC XX 3 3 12 4
IDTIC 4-1 14-1 5-1 50-1 -1 -1-1 1-
XTIC 4-1 54-1 12 3 60-1 -1 -1-1 2-
YTIC 4-1 94-1 12 3 60-1 -1 -1-1 3-
1 5.0567670E+06 4.2467572E+05
4 5.0567670E+06 4.4242825E+05
2 5.0284905E+06 4.2467572E+05
3 5.0284905E+06 4.4242825E+05
EOI
EOS
This is the single-precision version of the same coverage exported in Appendix F.
EXP 0 /HOME/SAMPLES/SINGLE.E00
ARC 2
1 0 0 0 0 0 7
3.4020000E+05 4.1000000E+06 3.4030000E+05 4.1002000E+06
3.4050000E+05 4.1002000E+06 3.4060000E+05 4.1001000E+06
3.4070000E+05 4.1002000E+06 3.4080000E+05 4.1000000E+06
3.4020000E+05 4.1000000E+06
2 0 0 0 0 0 4
3.4010000E+05 4.1002000E+06 3.4040000E+05 4.1004000E+06
3.4090000E+05 4.1002000E+06 3.4010000E+05 4.1002000E+06
-1 0 0 0 0 0 0
LAB 2
1 2 3.4050000E+05 4.1000622E+06
3.4050000E+05 4.1000622E+06 3.4050000E+05 4.1000622E+06
2 3 3.4046881E+05 4.1002622E+06
3.4046881E+05 4.1002622E+06 3.4046881E+05 4.1002622E+06
-1 0 0.0000000E+00 0.0000000E+00
TOL 2
1 2 8.0000000E-02
2 2 0.0000000E+00
3 2 0.0000000E+00
4 2 0.0000000E+00
5 2 0.0000000E+00
6 2 8.0000000E+00
7 2 8.0000000E-01
8 2 8.0000000E-01
9 2 8.0000000E-01
10 2 8.0000000E-01
-1 0 0 0 0 0 0
SIN 2
EOX
LOG 2
199308131302 0 3 33export cover stdfig11c stdfig11cp none
~
199308131305 0 0 8rename stdfig11c stdfig11cp
~
EOL
IFO 2
STDFIG11CP.BND XX 4 4 16 1
XMIN 4-1 14-1 12 3 60-1 -1 -1-1 1-
YMIN 4-1 54-1 12 3 60-1 -1 -1-1 2-
XMAX 4-1 94-1 12 3 60-1 -1 -1-1 3-
YMAX 4-1 134-1 12 3 60-1 -1 -1-1 4-
3.4010000E+05 4.1000000E+06 3.4090000E+05 4.1004000E+06
STDFIG11CP.PAT XX 5 5 46 3
AREA 4-1 14-1 12 3 60-1 -1 -1-1 1-
PERIMETER 4-1 54-1 12 3 60-1 -1 -1-1 2-
STDFIG11CP# 4-1 94-1 5-1 50-1 -1 -1-1 3-
STDFIG11CP-ID 4-1 134-1 5-1 50-1 -1 -1-1 4-
DATA 30-1 174-1 30-1 20-1 -1 -1-1 5-
-1.7000000E+05 0.0000000E+00 1 0
9.0000000E+04 1.5300563E+03 2 1SMALL
8.0000000E+04 1.6990717E+03 3 2LARGE
STDFIG11CP.TIC XX 3 3 12 4
IDTIC 4-1 14-1 5-1 50-1 -1 -1-1 1-
XTIC 4-1 54-1 12 3 60-1 -1 -1-1 2-
YTIC 4-1 94-1 12 3 60-1 -1 -1-1 3-
1 3.4090000E+05 4.1000000E+06
4 3.4090000E+05 4.1004000E+06
2 3.4010000E+05 4.1000000E+06
3 3.4010000E+05 4.1004000E+06
EOI
EOS
This is the double-precision version of the same coverage exported in Appendix E.
EXP 0 /HOME/SAMPLES/DOUBLE.E00
ARC 3
1 0 0 0 0 0 7
3.40200000000000E+05 4.10000000000000E+06
3.40300000000000E+05 4.10020000000000E+06
3.40500000000000E+05 4.10020000000000E+06
3.40600000000000E+05 4.10010000000000E+06
3.40700000000000E+05 4.10020000000000E+06
3.40800000000000E+05 4.10000000000000E+06
3.40200000000000E+05 4.10000000000000E+06
2 0 0 0 0 0 4
3.40100000000000E+05 4.10020000000000E+06
3.40400000000000E+05 4.10040000000000E+06
3.40900000000000E+05 4.10020000000000E+06
3.40100000000000E+05 4.10020000000000E+06
-1 0 0 0 0 0 0
LAB 3
1 2 3.40500000000000E+05 4.10006225000000E+06
3.40500000000000E+05 4.10006225000000E+06
3.40500000000000E+05 4.10006225000000E+06
2 3 3.40468812500000E+05 4.10026225000000E+06
3.40468812500000E+05 4.10026225000000E+06
3.40468812500000E+05 4.10026225000000E+06
-1 0 0.00000000000000E+00 0.00000000000000E+00
TOL 3
1 2 8.00000000000000E-02
2 2 0.00000000000000E+00
3 2 0.00000000000000E+00
4 2 0.00000000000000E+00
5 2 0.00000000000000E+00
6 2 8.00000000000000E+00
7 2 8.00000000000000E-01
8 2 8.00000000000000E-01
9 2 8.00000000000000E-01
10 2 8.00000000000000E-01
-1 0 0 0 0 0 0
SIN 3
EOX
LOG 3
199308131302 0 3 33export cover stdfig11c stdfig11cp none
~
199308131305 0 0 8rename stdfig11c stdfig11cp
~
199308251333 0 1 78copy stdfig11cp stdfig11cpx double
~
EOL
IFO 3
STDFIG11CPX.BND XX 4 4 32 1
XMIN 8-1 14-1 18 5 60-1 -1 -1-1 1-
YMIN 8-1 94-1 18 5 60-1 -1 -1-1 2-
XMAX 8-1 174-1 18 5 60-1 -1 -1-1 3-
YMAX 8-1 254-1 18 5 60-1 -1 -1-1 4-
3.40100000000000000E+05 4.10000000000000000E+06 3.40900000000000000E+05
4.10040
000000000000E+06
STDFIG11CPX.PAT XX 5 5 54 3
AREA 8-1 14-1 18 5 60-1 -1 -1-1 1-
PERIMETER 8-1 94-1 18 5 60-1 -1 -1-1 2-
STDFIG11CPX# 4-1 174-1 5-1 50-1 -1 -1-1 3-
STDFIG11CPX-ID 4-1 214-1 5-1 50-1 -1 -1-1 4-
DATA 30-1 254-1 30-1 20-1 -1 -1-1 5-
-1.70000000000000000E+05 0.00000000000000000E+00 1 0
9.00000000000000000E+04 1.53005627441406250E+03 2 1SMALL
8.00000000000000000E+04 1.69907165527343750E+03 3 2LARGE
STDFIG11CPX.TIC XX 3 3 20 4
IDTIC 4-1 14-1 5-1 50-1 -1 -1-1 1-
XTIC 8-1 54-1 18 5 60-1 -1 -1-1 2-
YTIC 8-1 134-1 18 5 60-1 -1 -1-1 3-
1 3.40900000000000000E+05 4.10000000000000000E+06
4 3.40900000000000000E+05 4.10040000000000000E+06
2 3.40100000000000000E+05 4.10000000000000000E+06
3 3.40100000000000000E+05 4.10040000000000000E+06
EOI
EOS